Infinity: Yu Jing... Yaokong on the street

You may remember a while back that I was working on this little fella and totally botched it. This led me having to ask my friend about his trick of soaking it in pine-sol to strip it. I gave it over to him and it worked beautifully thus saving the little guy from being thrown in the trash and saving me a few bucks as Infinity figures are not cheap.

Well I finally got around to finishing it and am happy to present it here to you now with a little better paint job than I did at first. Hope you like it.

Cheers
Kevin

Infinity: Yu Jing.... Shang Ji

Haven't had a chance to sit for very long and paint, so I tried just painting one figure all the way to get my fix. Grand daughters have been dominating time of late. This adds one more figure to my Infinity collection for the Yu Jing, I only need to paint two more figures to have my starter box set done. Infinity is a science fiction slash Japanese Anime based skirmish game set somewhere in the far future where you only need around ten figures to play.

My Shang Ji is a medium type armored troop that I hope will cause a little grief to my opponent. Here are a few shots. Still practicing trying to get the colors right and the blending but it's good enough for the table top.

Cheers

Kevin

Infinity: Yu Jing.... Zhanshi

I've had this thing for the Infinity figures and fluff for years (really since the first edition came out and I have never played and now it's up to 3rd Edition). I've collected some figures here or there with the thought that only having to paint up a handful of figures for this Science Fiction skirmish game would be fun, but this never came to fruition. I do love the figures because of their Japanese Anime look. Very colorful, and anatomically correct in proportions (which is a small pain after painting Heroic size figures, something to get used to).

Well an opportunity presented itself these past couple days, why with finishing my first unit of Highlanders for my Jacobite '45, I thought I'd do a few Infinity figures before I dove back in to my Jacobite stuff to finish my second unit I've started.

I like the Infinity line, especially Yu Jing faction. Why? At first it was the attraction to this line of figures TAGs (Tactical Armored Gear) which remind me a lot about Robotech, Appleseed, etc. As to the Yu Jing being a favorite, it's because of the Orange Yellow official color look of this faction. I've followed Ángel Giráldez paint formula (well mostly) and really like how he combines colors to get this orange-ish yellow look. Other than that I've pretty much went with the Box art and went mercenary on some color choices.

I've finished my first 3 figures (waiting on finishing the bases until I know more of what theme I want to go with, so raw for now) which come with the Starter Pack that I've had for years (back in 2008 I believe). These figures are the light troops and are called Zhanshi. I'll have three more to paint to finish the box, and probably won't have to do more than a dozen to have a faction to game with. But the rest will have to wait for now as I must finish my 2nd Highlander unit. Hope you like the pictures.

[Click on the pictures for larger view]

Cheers

Kevin

The Jacobite '45 first unit completed

I've been quite busy of late and only just now have a quiet moment to post my first generic Highlander Clan for my Jacobite '45 project. I would have posted this a little bit sooner but realized I had painted 5 figures too many of the sword bearing type and forgot I needed these for my second unit I am working on. The good news is I have five less to paint for the second unit.

I've realized that this may not quite be my cup of tea when it comes to my painting style. I can't paint thin straight lines for crap, but I gave it my best shot and hope that most looking at the figures on the gaming table won't notice from afar. Sigh, oh well, it was still fun and that's all that counts.

In the meantime I hope you enjoy what I have done as I return back to the painting table... ahem... I mean real life projects I must attend to.

Cheers
Kevin

(The above is the paper flag I tried making for first time, worked out pretty good I think)

(up close of some of the boys)

(All the lads together)

The Jacobite '45 flags

So I am nearing completion (okay 60 percent) of my first highlander unit and my 40mm X 40mm bases arrive the other day and I start getting excited about how I am going to mount them when It dawns on me that all my dudes are empty handed (doh!). I kept the weapons, and Targes seperate so I would have an easier time painting the nooks and crannies on figure. But more importantly the command stand had no flags made yet. Ugh, more work to do! I've normally done Flags, when I've done them at all, using decal transfers onto tin foil. This time around my subject matter seems to only have paper flags available.

I ordered one flag to test out how I liked it from Flags of War , actually I got it through Crann Tara as he stocks them for his range of figures. I didn't want to just glue then together and have this straight flat square of a flag making my paint job look bad (if flags are done right people don't notice the figures as much) so I started searching around the internet when I popped across a blog with a how to type post. It's a post back from 2009 but still applies today here is the link Wargaming in 28mm .

I had to go out and purchase a Glue Stick and once I had that in hand I was able to sit down and start trimming out the flags. I will stress how important it is to have clean hands and laying down a clean piece of paper as your work mat, as well as some patience. Once I cut out the flags and pre-folded them I used glue stick on both sides, placed it on pole then laid it down right where I had worked on placing glue on them to get a good crease around the pole while laying flat on table. I went to flip it over and to my horror glue was on the back. I was able to lick my finger and get it off with no damage but lesson learned, FIND ANOTHER CLEAN SPOT on your paper mat to do crease, not where you slopped on the glue.

The next step was laying them in a bowl of water for 30 seconds and then removing them and carefully crinkle them up into a position you think looks good to your own tastes. My second learning mistake was I placed both in water instead of one at a time. The first one I worked on I had no problem in shaping and able to set it aside to work on 2nd one (which I had pulled from the water and set aside). One of two things happened, first either sitting there for a minute or two longer while I worked on the other one the water soaked in more and started to dry out, or two I needed to wait a little longer to let the glue set before I immerse it in water. What happened is the paper started coming apart unlike the first one. To fix it I grab my trusty bottle of Elmer's glue put a little on my finger and worked it into flag on both sides. Then crinkled it again. It seemed to hold but I'll let you all know after tomorrow (your supposed to let them dry overnight) how it turns out. Note that I do not place any glue on the staff. The reason is that the staff or pole I am using is just to hold the flag for drying purposes. The flag will slide right off the pole and you will note in following picture they have slid to bottom of staff. I will remove them tomorrow, paint up a pole, add a very small touch of super glue and affix them to the painted staff. Then I will match the color and paint the edges to make the white disappear.

[one on left was first one, the one on right is the one I let sit to long]

Well that's it for now, I hope this helps you in future if you don't already know how to do this yourself. If all turns out well, this may well be the only way I go in future for flags.

Cheers
Kevin

The Jacobite '45

It's amazing what can inspire one to take up that paint brush and begin a new journey down a road you never thought you would.

It began a few months ago. My family and I are of Scottish decent, 5th generation as a matter of fact, and anything to do with the Scottish culture is always of great interest to us. My Sister discovered the book series of "Outlander", and when it became a TV series she was all over it. She had an advantage in that she knew what it was about already and tried to convince me to watch it, which I didn't until just a few months ago. I thought it was one of those romance, bla, bla, bla series and wasn't overly excited but she couldn't really tell me about it without spoiling it. So I ignored her sage advice and did nothing about it thinking she was crackers. A few months ago Itunes had the 1st season on sale and with Game of Thrones over and a few other series I like to watch done, I had nothing to lose so I downloaded it.

Man was I a turd for not listening to her. I was blown away. Mind you I almost turned off the very first episode after it was about half over with all the mushy stuff going on, and then it happened. The Heroine finally touched the bloody stone..... okay I won't spoil it for you either, but I have to tell you that they nailed it when it came to customs, costumes, and script (other than the mushy stuff;))!!! When the redcoats where chasing Highlanders through the woods I was suddenly sitting upright on the edge of my seat.

Okay it was all I needed to dive back into the world of the Jacobite '45. Suddenly I had ordered a few history books, scoured the internet for 28mm Jacobite figures, found color plates for reference etc. I was hooked!

The Jacobite '45 has through the centuries held a romantic feel to it and it has not changed to this day. New information has been coming forward from archaeology digs and this has pushed several authors to reconsider the period in question. An exciting time to learn for the first time or re discover new facts about an interesting time in history.

Some how I was able to talk a very good friend into joining me in this project and he has agreed to paint the English. We discussed a bit about what each company that makes 28mm for the period and what they brought to the table. My friend agreed to follow me in selecting a company called "Crann Tara" because I like the more anatomically correct looking features.

I received my first order a few day ago and have already mounted, primed, and put the beginning basic coats on. So far I am pleased with the fact that they aren't to busy which will be a relief as I figure out how to paint what will feel like a ba-zillon tartans.

My approach to painting all these tartans will be to give an artistic impression that you are looking at tartans, meaning I am not going to try and paint all those bloody lines, which will also have the added benefit of speeding up painting. Hopefully my approach will work. I have also discovered that during this period there was not a family/Clan tartan, that the tartans where regionally made and it didn't really indicate a clan as much as the region they came from. Also looking at paintings of battles and other references I see I am going to have to mix them up a bit. I've decided to mix the units by picking three basic colors and paint a third of each unit so.

Well that's enough talk for now and I'll leave you with a few pictures of the project start.

Cheers
Kevin

Emperor's Children Contemptor Dreadnought

Wow I have touched this model since July 4th! But that's okay, I've been doodling in other stuff in the meantime and that's all that counts. Do what makes you happy (as long as it doesn't get you arrested that is). New units for my Emperor's Children did not materialize like I hoped in August, but I did get some Infinity stuff that made me do a skip and a hop in excitement. But that's another story. Today for some reason my Contemptor Dreadnought caught my eye and I had an urge to try and push on with it. Probably because I've been painting my Tau animated robots of late and the Purple scheme of the Emperor's Children drew me away from the Tau white.

Today wasn't a painting day but instead was magnetizing the arms so my very expensive model could be used in more than one configuration. I took a few photos with my trusty Ipad camera so they may not be the best but you get the picture (while actually four pictures, yuck, yuck, yuck). Tomorrow I hope to prime the pieces and get this bad boy out of my to do paint pile very soon.

Here are the four pics showing this one armed with a Twin linked Heavy Bolter and a Conversion Beamer (I armed him with this just because the name was so cool, conversion beamer, right out of the 1960's scifi comic books!)

Cheers

Kevin